V-Flex G2K is a two-component cementitious polymer modified elastomeric, waterproofing & protective coating. which reduces the room temperature up to 7 – 9°C at peak summer hours.
| Properties | Specifications |
|---|---|
| Nature | Two-component |
| Appearance of mix | Free-flowing slurry |
| Specific gravity @27°C | 1.60 ± 0.10 |
| Viscosity of mix | 10000 ± 2000 cP |
| pH | 10.00 – 12.00 |
| Pot life of mix | 40 – 45 minutes |
| Surface dry | 30 minutes |
| Water permeability | Excellent – no leakage after 24 hours |
| Over coating interval | 4 – 6 hours |
- Concrete walls, roofs, terrace
- Concrete roof slabs, floors, balcony floor slabs
- Water tanks and swimming pools
- Waterproof coating (bottom coat) for marble, granite and other natural stones
- Flexible and permeable coating
- Waterproofing for concrete structures
- Excellent adhesion to concrete and natural stones
- Can be applied as thick coating
4:1 (Part A: Part B)
(Part A = Powder & Part B = Liquid)
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
70 – 80 sq.ft/litre/coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, oil, wax, rust and loose or peeling paint before painting
- Repair holes and cracks with a thick paste of V-Flex G2K prepared in the recommended ratio
- Prepare the main batch of V-Flex G2K in the recommended ratio and stir thoroughly to get a homogenous mixture
- Wet the surface with water by sprinkler and apply single coat and allow it to dry for about 2-4 hours
- After 2-4 hours, repeat the above process
- The entire quantity of both the components have to be mixed and used at one go
- For best results do not dilution with water
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Nature | Two-component |
| Appearance of mix | Free-flowing slurry |
| Specific gravity @27°C | 1.60 ± 0.10 |
| Viscosity of mix | 10000 ± 2000 cP |
| pH | 10.00 – 12.00 |
| Pot life of mix | 40 – 45 minutes |
| Surface dry | 30 minutes |
| Water permeability | Excellent – no leakage after 24 hours |
| Over coating interval | 4 – 6 hours |
- Concrete walls, roofs, terrace
- Concrete roof slabs, floors, balcony floor slabs
- Water tanks and swimming pools
- Waterproof coating (bottom coat) for marble, granite and other natural stones
- Flexible and permeable coating
- Waterproofing for concrete structures
- Excellent adhesion to concrete and natural stones
- Can be applied as thick coating
4:1 (Part A: Part B)
(Part A = Powder & Part B = Liquid)
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
70 – 80 sq.ft/litre/coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, oil, wax, rust and loose or peeling paint before painting
- Repair holes and cracks with a thick paste of V-Flex G2K prepared in the recommended ratio
- Prepare the main batch of V-Flex G2K in the recommended ratio and stir thoroughly to get a homogenous mixture
- Wet the surface with water by sprinkler and apply single coat and allow it to dry for about 2-4 hours
- After 2-4 hours, repeat the above process
- The entire quantity of both the components have to be mixed and used at one go
- For best results do not dilution with water
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children