• Fixing all types tiles on internal and external walls/floors
• Tiling applications in swimming pools

• Ready to use, needs only mixing of water
• Excellent adhesion and slip resistance
• Excellent waterproofing
• Crack free and low shrinkage
• No need for presoaking of tiles and water curing
• Suitable for both interior and exterior applications
• Better open time

• Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
• Protect from direct sunlight

300 ml water per kg of Reve Fix powder.

4 sq.ft / kg for 3 mm thickness.

• The surface to be tiled must be clean and dry
• Existing tiles should be clean and securely fixed
• Add 1 kg of Reve Fix powder to 300 ml potable water
• Mix thoroughly until a smooth creamy consistency is obtained
• Allow the mixture to stand for 10 minutes
• Mix again and start applying with a trowel
• Apply a thin bed of 3 mm thickness by a trowel. Comb the surface gently and start placing tiles before the adhesive begins to surface dry
• While fixing the tiles into the adhesive apply slight pressure to ensure good adhesion

• Do not apply directly on damp surfaces
• Do not use to fix heavy tiles or stones, marble, granite, etc on vertical areas
• Grouting should not be done for at least 24 hours

• Use rubber hand gloves & safety goggles
• In case of contact with skin, wash with plenty of water
• Keep out of reach of children

Clean all tools and application equipments with water immediately after use. Cured material can be removed mechanically.