Wood Pro is a solvent based protection coating for wooden articles form borer and termite attack.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Appearance | Light brown liquid |
| Specific gravity @27°C | 1.00 – 1.05 |
| Non-volatile content | 3 – 5% |
| pH | Neutral |
- Wood Pro is used to protect raw wood, wooden furniture and plywood, veneered products.
- 100% protection against borer and termite attack
- Fungal and algae resistance
- Protects wood from water absorption
- Resistance to bio degradation
- Protection from weathering and ageing
- Suitable for painting, varnishing, polishing and waxing
- Non staining clear coat
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
200 sq.ft / litre.
- Eco-friendly and safe to use
- Protects wood by preventing infestation
- Prevents wood from easily absorbing water
- Make sure the wood surface is free from oils and dusts
- Apply wood pro over the clean surface by brushing / spraying
- Allow 3 hours for drying and then apply coat
- Wood pro can be added to glue mix during plywood manufacturing
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Appearance | Light brown liquid |
| Specific gravity @27°C | 1.00 – 1.05 |
| Non-volatile content | 3 – 5% |
| pH | Neutral |
- Wood Pro is used to protect raw wood, wooden furniture and plywood, veneered products.
- 100% protection against borer and termite attack
- Fungal and algae resistance
- Protects wood from water absorption
- Resistance to bio degradation
- Protection from weathering and ageing
- Suitable for painting, varnishing, polishing and waxing
- Non staining clear coat
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
200 sq.ft / litre.
- Eco-friendly and safe to use
- Protects wood by preventing infestation
- Prevents wood from easily absorbing water
- Make sure the wood surface is free from oils and dusts
- Apply wood pro over the clean surface by brushing / spraying
- Allow 3 hours for drying and then apply coat
- Wood pro can be added to glue mix during plywood manufacturing
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children