Water Seal is an integral powder waterproofing admixture for all types of concrete, plaster and mortar.
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Colour | Pale white |
| Tapped density | 1.50 ± 0.10 |
| pH of 10% slurry | 7 – 9 |
| Setting time | 30 – 600 minutes |
- Basements
- Roof slaps and screeds
- External plastering
- Balconies and bathrooms
- Water tanks, water retaining structures and terrace
- Sumps and drains
- Beams and columns
- Repair works and renovation works
- Compatible with all types of cements
- Reduces the permeability of water into concrete and improves water tightness
- No added chloride thus not contributing to corrosion of steel
- Reduces capillary structures formed in concrete
- Facilitates better workability without increased water content
- Reduces shrinkage and thus avoid crack formation
- Leads to better finish
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
1 kg / 50 kg of cement.
- Dry mix the sand, aggregates and cement as per the mix design in a concrete mixer for 2 minutes
- Then add 70-80% of required water and mix for 2-3 minutes
- In the remaining portion of water add Water Seal Powder. Then add this to concrete mixer and mix for another 2-3 minutes for a homogenous mix
- Place the concrete or apply plaster as per your need
- Cure as per the normal procedure
- Do not add Water Seal directly to dry cement or aggregate mix
- Do not increase the dosage of Water Seal than the recommended level
- Maintain water-cement ratio as low as possible
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Colour | Pale white |
| Tapped density | 1.50 ± 0.10 |
| pH of 10% slurry | 7 – 9 |
| Setting time | 30 – 600 minutes |
- Basements
- Roof slaps and screeds
- External plastering
- Balconies and bathrooms
- Water tanks, water retaining structures and terrace
- Sumps and drains
- Beams and columns
- Repair works and renovation works
- Compatible with all types of cements
- Reduces the permeability of water into concrete and improves water tightness
- No added chloride thus not contributing to corrosion of steel
- Reduces capillary structures formed in concrete
- Facilitates better workability without increased water content
- Reduces shrinkage and thus avoid crack formation
- Leads to better finish
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
1 kg / 50 kg of cement.
- Dry mix the sand, aggregates and cement as per the mix design in a concrete mixer for 2 minutes
- Then add 70-80% of required water and mix for 2-3 minutes
- In the remaining portion of water add Water Seal Powder. Then add this to concrete mixer and mix for another 2-3 minutes for a homogenous mix
- Place the concrete or apply plaster as per your need
- Cure as per the normal procedure
- Do not add Water Seal directly to dry cement or aggregate mix
- Do not increase the dosage of Water Seal than the recommended level
- Maintain water-cement ratio as low as possible
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children