Veco Cement Primer is a water-based acrylic primer suitable for interior & exterior sand plastered surfaces, concrete and asbestos, etc.
| Properties | Specifications |
|---|---|
| Nature | White, smooth paste |
| Viscosity | 10000 ± 2000 cP |
| Specific gravity @ 27°C | 1.50 ± 0.05 |
| Non-volatile content | 50 – 60% |
| pH | 10.00 ± 1.00 |
| Sheen Level | Soft sheen |
| Surface dry | 30 minutes |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Cement plasters, concrete, cementitious renderings
- Asbestos, brick works, gypsum boards
- False ceilings
- Smooth finish
- Good hiding power
- Allows the surface to breathe and expel moisture
- Seals porous surfaces
- Very good intercoat adhesion
- Free from heavy metals like mercury, lead and chromium
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
750 ml of water per litre of cement primer.
110 – 120 sq.ft/litre/coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Repair holes and cracks with suitable filler
- Dilute with 75% of water by volume to Veco Cement Primer and stir thoroughly to get a homogenous mixture
- Apply single coat and allow it to dry for about 2-4 hours
- Ambient and surface temperatures must be between 5°C and 40°C during application
- The moisture content of the wall must be less than 10% or have aged for at least 28 days
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Nature | White, smooth paste |
| Viscosity | 10000 ± 2000 cP |
| Specific gravity @ 27°C | 1.50 ± 0.05 |
| Non-volatile content | 50 – 60% |
| pH | 10.00 ± 1.00 |
| Sheen Level | Soft sheen |
| Surface dry | 30 minutes |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Cement plasters, concrete, cementitious renderings
- Asbestos, brick works, gypsum boards
- False ceilings
- Smooth finish
- Good hiding power
- Allows the surface to breathe and expel moisture
- Seals porous surfaces
- Very good intercoat adhesion
- Free from heavy metals like mercury, lead and chromium
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
750 ml of water per litre of cement primer.
110 – 120 sq.ft/litre/coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Repair holes and cracks with suitable filler
- Dilute with 75% of water by volume to Veco Cement Primer and stir thoroughly to get a homogenous mixture
- Apply single coat and allow it to dry for about 2-4 hours
- Ambient and surface temperatures must be between 5°C and 40°C during application
- The moisture content of the wall must be less than 10% or have aged for at least 28 days
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children