Veco Distemper is a water-based emulsion composed of acrylic polymers and special ingredients.
| Properties | Specifications |
|---|---|
| Nature | Smooth paste |
| Viscosity | 25000 ± 5000 cP |
| Specific gravity @ 27°C | 1.50 ± 0.05 |
| Non-volatile content | 60 ± 5% |
| pH | 8.00 – 10.00 |
| Finish | Rich matt |
| Surface dry | 30 minutes |
| Colour | Base / White |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Decorative coating for interior walls & plastered surfaces
- Decorative coating for dry wall surfaces like gypsum, cement fibre boards, etc
- Rich matt finish
- Good hiding property
- Allows the surface to breathe and expel moisture
- Waterproofing
- Very good intercoat adhesion
- Can be applied by brush or rollers
- Free from heavy metals like mercury, lead and chromium
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
600 ml of water per kg of distemper.
80 – 90 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Application should start 4 hours after the application of Veco Cement Primer
- Dilute with 40% of water by volume to Veco Distemper and stir thoroughly to get a homogenous mixture
- Apply single coat and allow it to dry for about 2-4 hours
- After 2-4 hours, apply another coat
- Ambient and surface temperatures must be between 5°C and 40°C during application
- The moisture content of the wall must be less than 10% or have aged for at least 28 days
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Nature | Smooth paste |
| Viscosity | 25000 ± 5000 cP |
| Specific gravity @ 27°C | 1.50 ± 0.05 |
| Non-volatile content | 60 ± 5% |
| pH | 8.00 – 10.00 |
| Finish | Rich matt |
| Surface dry | 30 minutes |
| Colour | Base / White |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Decorative coating for interior walls & plastered surfaces
- Decorative coating for dry wall surfaces like gypsum, cement fibre boards, etc
- Rich matt finish
- Good hiding property
- Allows the surface to breathe and expel moisture
- Waterproofing
- Can be applied by brush or rollers
- Available in both Base and White variants
- Base can be tinted with different colours
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
600 ml of water per kg of distemper.
80 – 90 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Application should start 4 hours after the application of Veco Cement Primer
- Dilute with 40% of water by volume to Veco Distemper and stir thoroughly to get a homogenous mixture
- Apply single coat and allow it to dry for about 2-4 hours
- After 2-4 hours, apply another coat
- Ambient and surface temperatures must be between 5°C and 40°C during application
- The moisture content of the wall must be less than 10% or have aged for at least 28 days
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children