V-Repel is a silane/siloxane based penetrating sealer for effective water repellent protective coating.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Clear/White |
| Specific gravity @27°C | 1.00 ± 0.10 |
| Non-volatile content | 15.00 / 45.00 |
| pH | Neutral |
| Drying time | 15 – 30 minutes |
- Building structures, cement plaster structures
- Precast concrete, concrete blocks, concrete rendering
- Asbestos sheets
- Natural stones and artificial stones
- Ceramic tiles, clay brick surfaces
- Mangalore tiled roofs, corrugated AC roofings
- Painted surfaces
- Ready to use primer
- Available in both water-based and solvent-based formulations
- Clear coating does not change the appearance of surface
- Penetrates up to 3-4 mm
- Prevents erosion
- Prevents efflorescence
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
40 – 80 sq. ft / litre / coat depending upon the porosity of the surface.
- Surface should be cleaned thoroughly
- Stir the containers well before use. Apply V-Repel evenly over the surface with brush/spray
- On vertical applications, starting from the bottom, apply V-Repel in an upward direction achieving 6-8 inches rundown
- After applying 2 coats for best results, allow 48-72 hours for complete penetration
- Do not dilute V-Repel with any solvent/water
- Close the lid after use
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Clear/White |
| Specific gravity @27°C | 1.00 ± 0.10 |
| Non-volatile content | 15.00 / 45.00 |
| pH | Neutral |
| Drying time | 15 – 30 minutes |
- Building structures, cement plaster structures
- Precast concrete, concrete blocks, concrete rendering
- Asbestos sheets
- Natural stones and artificial stones
- Ceramic tiles, clay brick surfaces
- Mangalore tiled roofs, corrugated AC roofings
- Painted surfaces
- Ready to use primer
- Available in both water-based and solvent-based formulations
- Clear coating does not change the appearance of surface
- Penetrates up to 3-4 mm
- Prevents erosion
- Prevents efflorescence
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
40 – 80 sq. ft / litre / coat depending upon the porosity of the surface.
- Surface should be cleaned thoroughly
- Stir the containers well before use. Apply V-Repel evenly over the surface with brush/spray
- On vertical applications, starting from the bottom, apply V-Repel in an upward direction achieving 6-8 inches rundown
- After applying 2 coats for best results, allow 48-72 hours for complete penetration
- Do not dilute V-Repel with any solvent/water
- Close the lid after use
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children