V-Crete is an acrylic polymer-based white liquid. When this liquid is mixed with cement, that composite becomes sticky, strong and helps resist dampness.
| Properties | Specifications |
|---|---|
| Appearance | Free-flowing liquid |
| Colour | 30 minutes |
| Specific gravity @ 27°C | 1.00 – 1.05 |
| Non-volatile content | 30.00 ± 3.00% |
| pH range | 8 – 10 |
- Walls, roofing, terraces
- Bathrooms, kitchens, balconies
- Concrete repair work
- Water retaining structures
- Basements
- Sealing hairline cracks
- Mortar block work and brickwork
- Reduces the permeability of water into concrete and improves water tightness
- Anti-efflorescence
- Completely arrests water leakages
- Good adhesion
- Easy mixing and application
- Flexible
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
| Damp proofing | 1 part V-Crete : 4 part Water : 10 part Cement |
| Salty petre resisting | 1 part V-Crete : 4 part Water : 10 part Cement (this mixture has to be applied by brush after the application of V-Repel and before plastering) |
| Crack filling | 1 part V-Crete : 2 parts cement (white / grey) |
| Wear and impact resisting | Add 5 to 10% by weight of cement |
- The surfaces must be be clean and free from oil, grease, dust, rust, etc
- Prepare V-Crete solution by mixing it with water. Add this mixture to the required cement and sand combination to prepare cement mortar, plastering, waterproofing / bond coat, putty
- Dampen the surface and apply the V-Crete modified cementitious mixture by brush or trowel
- Cure by spraying water periodically for 2 – 3 days
- Do not add V-Crete directly to dry cement or aggregate mix
- Use the mixture within 30-minutes from the time of preparation
- Maintain water-cement ratio as low as possible
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance | Free-flowing liquid |
| Colour | 30 minutes |
| Specific gravity @ 27°C | 1.00 – 1.05 |
| Non-volatile content | 30.00 ± 3.00% |
| pH range | 8 – 10 |
- Walls, roofing, terraces
- Bathrooms, kitchens, balconies
- Concrete repair work
- Water retaining structures
- Basements
- Sealing hairline cracks
- Mortar block work and brickwork
- Reduces the permeability of water into concrete and improves water tightness
- Anti-efflorescence
- Completely arrests water leakages
- Good adhesion
- Easy mixing and application
- Flexible
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
| Damp proofing | 1 part V-Crete : 4 part Water : 10 part Cement |
| Salty petre resisting | 1 part V-Crete : 4 part Water : 10 part Cement (this mixture has to be applied by brush after the application of V-Repel and before plastering) |
| Crack filling | 1 part V-Crete : 2 parts cement (white / grey) |
| Wear and impact resisting | Add 5 to 10% by weight of cement |
- The surfaces must be be clean and free from oil, grease, dust, rust, etc
- Prepare V-Crete solution by mixing it with water. Add this mixture to the required cement and sand combination to prepare cement mortar, plastering, waterproofing / bond coat, putty
- Dampen the surface and apply the V-Crete modified cementitious mixture by brush or trowel
- Cure by spraying water periodically for 2 – 3 days
- Do not add V-Crete directly to dry cement or aggregate mix
- Use the mixture within 30-minutes from the time of preparation
- Maintain water-cement ratio as low as possible
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children