Tek Seal is a multipurpose cementitious polymer composite bonding agent for waterproof coating, crack-filling and tile fixing etc.
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Open time | 15 - 20 minutes |
| Tapped density | 1.60 – 1.80 |
| Pot Life | 30 minutes |
- Overhead tanks, septic tanks, potable water tanks, swimming pools
- Cracks in walls, roofs, water tanks
- Fixing all types ceramic tiles, marbles, natural stones and artificial stones
- Arrests 100% leakage in building roofs, overhead tanks and septic tanks
- Excellent water tightness and elastic waterproofing
- Provides a durable barrier to water penetration on porous surfaces
- Ideal for exposed brickwork & concrete blocks
- Minimizes efflorescence
- Being fine particles, it penetrates into all pores, hair cracks and crevices etc, and seals them when it dries
- It forms a film on drying which withstands the expansion and contraction of the surface
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
400 ml water per kg of powder.
- 1 kg powder to be mixed with 400 ml water thoroughly
- Mix paste well, set aside for 15 minutes and stir well again
- This paste can then be applied as a layer on terraces, walls, arches, ceiling etc, by brush with 2 -3 mm thickness & then pressed down with a mason’s trowel thoroughly
- No curing by water is required
- For concrete surface waterproofing, Tek Seal can be mixed with water and applied by brush
- Grouting should not be done for at least 24 hours after tile fixing
- When 2 or more bags are required, it is advisable to dry blend the powders first to avoid color variation
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Clean all tools and application equipments with water immediately after use
- Cured material can be removed mechanically
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Open time | 15 - 20 minutes |
| Tapped density | 1.60 – 1.80 |
| Pot Life | 30 minutes |
- Overhead tanks, septic tanks, potable water tanks, swimming pools
- Cracks in walls, roofs, water tanks
- Fixing all types ceramic tiles, marbles, natural stones and artificial stones
- Arrests 100% leakage in building roofs, overhead tanks and septic tanks
- Excellent water tightness and elastic waterproofing
- Provides a durable barrier to water penetration on porous surfaces
- Ideal for exposed brickwork & concrete blocks
- Minimizes efflorescence
- Being fine particles, it penetrates into all pores, hair cracks and crevices etc, and seals them when it dries
- It forms a film on drying which withstands the expansion and contraction of the surface
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
400 ml water per kg of powder.
- 1 kg powder to be mixed with 400 ml water thoroughly
- Mix paste well, set aside for 15 minutes and stir well again
- This paste can then be applied as a layer on terraces, walls, arches, ceiling etc, by brush with 2 -3 mm thickness & then pressed down with a mason’s trowel thoroughly
- No curing by water is required
- For concrete surface waterproofing, Tek Seal can be mixed with water and applied by brush
- Grouting should not be done for at least 24 hours after tile fixing
- When 2 or more bags are required, it is advisable to dry blend the powders first to avoid color variation
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Clean all tools and application equipments with water immediately after use
- Cured material can be removed mechanically