Summer Coat is a two component cooling coating for the roof which reduces the room temperature.
| Properties | Specifications |
|---|---|
| Appearance after mixing | White, smooth paste |
| Mix density | 1.40 ± 0.05 |
| pH | 9.00 ± 1.00 |
| Surface dry | 30 minutes |
| Over coating interval | 6 hours |
- Terraces, rooftops, parapet walls, lime terraced roofs, roof slabs
- RCC, asbestos, sunshades
- Exterior walls of buildings
- Ideal for R.C.C. Asbestos, G.I. Sheets, exterior walls and pathways
- Reduces power and water consumption of humidification plants
- Prevents emission of highly polluting particles from asbestos sheets
- Glass wool padding and false ceiling are eliminated
- Cost effective
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
300 sq.ft / 5 kg bag / 2 coats.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Wet the surface enough prior to painting
- Mix 125 ml of Summer Coat liquid into 8 litres of clean water
- Add 5 kg of Summer Coat powder slowly and stir into the mixed solution
- Apply the paint over the wet surface uniformly and allow it to dry completely
- After 2-4 hours, apply another coat
- Do not apply in hot sunlight (generally don’t paint between 10 a.m. to 5 p.m.)
- Don’t mix the liquid directly to the powder
- In a single shot, mix all the contents
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance after mixing | White, smooth paste |
| Mix density | 1.40 ± 0.05 |
| pH | 9.00 ± 1.00 |
| Surface dry | 30 minutes |
| Over coating interval | 6 hours |
- Terraces, rooftops, parapet walls, lime terraced roofs, roof slabs
- RCC, asbestos, sunshades
- Exterior walls of buildings
- Ideal for R.C.C. Asbestos, G.I. Sheets, exterior walls and pathways
- Reduces power and water consumption of humidification plants
- Prevents emission of highly polluting particles from asbestos sheets
- Glass wool padding and false ceiling are eliminated
- Cost effective
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
300 sq.ft / 5 kg bag / 2 coats.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Wet the surface enough prior to painting
- Mix 125 ml of Summer Coat liquid into 8 litres of clean water
- Add 5 kg of Summer Coat powder slowly and stir into the mixed solution
- Apply the paint over the wet surface uniformly and allow it to dry completely
- After 2-4 hours, apply another coat
- Do not apply in hot sunlight (generally don’t paint between 10 a.m. to 5 p.m.)
- Don’t mix the liquid directly to the powder
- In a single shot, mix all the contents
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children