Tile Plus is a specially designed pleasant paint for Kollam and Mangaluru clay roofing tiles. It is composed of advanced polymer ingredients and is a water-soluble environmental friendly product.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | As per customer requirement |
| Specific gravity @27°C | 1.00 ± 0.05 |
| Non-volatile content | 40.00 ± 5.00% |
| Viscosity | 100 - 200 cP |
| Finish | Glossy |
| Touch dry | 1 hour |
| Hard dry | 8 hours |
| Over coating interval | 4 – 6 hours |
- Kollam and Mangaluru clay roofing tiles
- Exterior brick works
- Glossy finish
- UV resistance
- Dust resistance
- Colour never fades
- Algae and fungal resistance
- Water repellent property
- Ideal for wood, metal & cement surfaces
- Best before 24 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
2 coats
100 – 120 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Prime the surfaces with V-Repel water repellent primer
- Apply a single coat and allow it to dry for about 4 – 6 hours with brush/rollers
- After 4 – 6 hours, apply another coat
- Two coats are recommended
- Don’t thin the paint with any solvent
- Never apply on wet/damp surfaces
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use. Cured material can be removed mechanically.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | As per customer requirement |
| Specific gravity @27°C | 1.00 ± 0.05 |
| Non-volatile content | 40.00 ± 5.00% |
| Viscosity | 100 - 200 cP |
| Finish | Glossy |
| Touch dry | 1 hour |
| Hard dry | 8 hours |
| Over coating interval | 4 – 6 hours |
- Kollam and Mangaluru clay roofing tiles
- Exterior brick works
- Glossy finish
- UV resistance
- Dust resistance
- Colour never fades
- Algae and fungal resistance
- Water repellent property
- Ideal for wood, metal & cement surfaces
- Best before 24 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
2 Coats.
100 – 120 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Prime the surfaces with V-Repel water repellent primer
- Apply a single coat and allow it to dry for about 4 – 6 hours with brush/rollers
- After 4 – 6 hours, apply another coat
- Two coats are recommended
- Don’t thin the paint with any solvent
- Never apply on wet/damp surfaces
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use. Cured material can be removed mechanically.