Reve Fill is a polymer modified, cement-based, single pack tile grouting mixture composed of selected aggregates and pigments.
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Open time | 15 - 20 minutes |
| Tapped density | 1.60 – 1.80 |
| Pot Life | 30 minutes |
- Grouting all varieties - from ceramic tiles, marbles, natural stones to artificial stones
- Bathrooms, swimming pools, kitchens
- Ready to use, needs only mixing of water
- Available in standard shades
- Non shrinking & crack-free
- Flexible
- Waterproofing
- Application up to joint width of 5mm
- Colour does not fade over time
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
500 ml water per kg of Reve Fill powder.
40 sq.ft / kg for 15 mm x 15 mm tile in 3 mm thickness.
- Before application, ensure that the tiles are completely set and adhesive is cured
- Tile joints should be clean and free from oil, grease, or any foreign matters
- Add 2 parts of Reve Fil powder to 1 part of clean water and mix thoroughly without lumps
- Dampen the tile joints and apply the mixed material without any air gaps
- Apply the material within 30 minutes of mixing
- Remove the excess material with wet sponge or soft cloth without disturbing the area on which it has been applied
- Allow the joint to cure for 24-hours
- Grouting should not be done for at least 24 hours after tile fixing
- When 2 or more bags are required, it is advisable to dry blend the powders first to avoid color variation
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with water immediately after use. Cured material can be removed mechanically.
| Properties | Specifications |
|---|---|
| Appearance | Lump free powder |
| Open time | 15 - 20 minutes |
| Tapped density | 1.60 – 1.80 |
| Pot Life | 30 minutes |
- Grouting all varieties - from ceramic tiles, marbles, natural stones to artificial stones
- Bathrooms, swimming pools, kitchens
- Ready to use, needs only mixing of water
- Available in standard shades
- Non shrinking & crack-free
- Flexible
- Waterproofing
- Application up to joint width of 5mm
- Colour does not fade over time
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
300 ml water per kg of Reve Fix powder.
40 sq.ft / kg for 15 mm x 15 mm tile in 3 mm thickness.
- Before application, ensure that the tiles are completely set and adhesive is cured
- Tile joints should be clean and free from oil, grease, or any foreign matters
- Add 2 parts of Reve Fil powder to 1 part of clean water and mix thoroughly without lumps
- Dampen the tile joints and apply the mixed material without any air gaps
- Apply the material within 30 minutes of mixing
- Remove the excess material with wet sponge or soft cloth without disturbing the area on which it has been applied
- Allow the joint to cure for 24-hours
- Grouting should not be done for at least 24 hours after tile fixing
- When 2 or more bags are required, it is advisable to dry blend the powders first to avoid color variation
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with water immediately after use. Cured material can be removed mechanically.