Paint-X is a solvent-based, non flammable, instant paint remover which conforms to IS 430.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | Off white |
| Toxicity | Non toxic |
| Non-volatile content | 3 – 5% |
| pH | Neutral |
- Suitable for household, industrial, automotive and marine applications
- Wood and metal surfaces
- Starts to remove paint in 5 minutes
- Non flammable
- Non alkaline and non corrosive
- Deep penetration, hence removes multiple layers in a single shot
- Can be used in vertical surfaces also
- Less evaporation rate
- Available in both tin and spray type containers
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
20 sq.m/ litre (variable to paint thickness).
- Shake well before use and apply liberally over the paint surface by brush or by spraying
- Use general precautionary measures as done during regular painting
- Wait for 5 minutes or until top layer peels and scrub the paint with a putty knife
- For stubborn paint residues, apply Paint-X over them once more and remove in about 2 to 3 minutes
- If the paint film is too thick, Paint-X may take additional time to penetrate and the surface may need another coat
- Don’t use on plastic/polymeric surfaces
- Don’t dilute the material with any solvent
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | Off white |
| Toxicity | Non toxic |
| Non-volatile content | 3 – 5% |
| pH | Neutral |
- Suitable for household, industrial, automotive and marine applications
- Wood and metal surfaces
- Starts to remove paint in 5 minutes
- Non flammable
- Non alkaline and non corrosive
- Deep penetration, hence removes multiple layers in a single shot
- Can be used in vertical surfaces also
- Less evaporation rate
- Available in both tin and spray type containers
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
20 sq.m/ litre (variable to paint thickness).
- Shake well before use and apply liberally over the paint surface by brush or by spraying
- Use general precautionary measures as done during regular painting
- Wait for 5 minutes or until top layer peels and scrub the paint with a putty knife
- For stubborn paint residues, apply Paint-X over them once more and remove in about 2 to 3 minutes
- If the paint film is too thick, Paint-X may take additional time to penetrate and the surface may need another coat
- Don’t use on plastic/polymeric surfaces
- Don’t dilute the material with any solvent
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children