OYT is a water-based emulsion composed of acrylic polymers and selected ingredients which is specially designed for water tanks.
| Properties | Specifications |
|---|---|
| Nature | Smooth paste |
| Colour | Cow dung colour |
| Specific gravity @ 27°C | 1.40 ± 0.05 |
| Non-volatile content | 55.00 ± 5.00% |
| Viscosity | 3000 – 5000 cP |
| pH | 8.00 ± 1.00 |
| Finish | Rich matt |
| Surface dry | 30 minutes |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Water tanks, septic tanks
- Swimming pools
- Alternate to chlorinated rubber paint
- Environment friendly
- Advanced formulation to arrest water leakage
- Elastomeric flexible coating
- Excellent resistance to ingress of water
- Non toxic
- Safe for potable water
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
400 ml of water per litre of OYT.
100 – 110 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Apply one coat of Veco Primer and allow it to dry for 4-6 hours
- Dilute with 40% of water by volume to OYT and stir thoroughly to get homogenous mixture
- Apply single coat and allow it to dry for about 4-6 hours
- After 4-6 hours, apply another coat
- Do not apply on wet tanks
- Ambient and surface temperatures must be between 5°C and 40°C during application
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Nature | Smooth paste |
| Colour | Cow dung colour |
| Specific gravity @ 27°C | 1.40 ± 0.05 |
| Non-volatile content | 55.00 ± 5.00% |
| Viscosity | 3000 – 5000 cP |
| pH | 8.00 ± 1.00 |
| Finish | Rich matt |
| Surface dry | 30 minutes |
| Over coating interval | 4 – 6 hours |
| Stability of thinned paint | 24 hours |
- Water tanks, septic tanks
- Swimming pools
- Alternate to chlorinated rubber paint
- Environment friendly
- Advanced formulation to arrest water leakage
- Elastomeric flexible coating
- Excellent resistance to ingress of water
- Non toxic
- Safe for potable water
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
400 ml of water per litre of OYT.
100 – 110 sq.ft / litre / coat.
- All surfaces must be clean, dry and free of dirt, chalk, grease, wax, rust and loose or peeling paint before painting
- Apply one coat of Veco Primer and allow it to dry for 4-6 hours
- Dilute with 40% of water by volume to OYT and stir thoroughly to get homogenous mixture
- Apply single coat and allow it to dry for about 4-6 hours
- After 4-6 hours, apply another coat
- Do not apply on wet tanks
- Ambient and surface temperatures must be between 5°C and 40°C during application
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children