Metal Pro is a rust inhibiting coating which converts rusted metal into a rust retarding paintable surface.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Light brown |
| Specific gravity @27°C | 1.00 – 1.10 |
| Viscosity in Ford Cup B4 | 10 – 14 seconds |
| Non-volatile content | 30 – 35% |
| pH | 5 – 7 (neutral after coating) |
| Touch dry | 10 – 30 minutes |
| Hard dry | 24 hours |
- M.S. Pipes, M.S. Sheets, M.S. Wires M.S. Plates
- Ropes, rods, grills, rolling shutters
- Castings and railings
- Machineries, automobiles
- Railway coaches & wagons, boats, ships
- Bolts, screws, nuts and shafts
- Eliminates sand blasting, acid pickling, washing, flame cleaning, wire brushing, phosphating and oiling
- Penetrates deep and converts all rusted layers into bluish black protective coating
- Saves the cost of red oxide priming
- Paintables
- Best before 6 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
2 coats
250 sq.ft / litre / coat.
- Clean the surface thoroughly free from oil, grease and loose rust
- Shake the Metal Pro solution well before use and transfer it to a plastic container
- Apply a single coat by brush or spray or immersion
- Allow the surface to dry for one day for complete rust conversion
- After a day, coat with desired paint
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use. Cured material can be removed mechanically.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Light brown |
| Specific gravity @27°C | 1.00 – 1.10 |
| Viscosity in Ford Cup B4 | 10 – 14 seconds |
| Non-volatile content | 30 – 35% |
| pH | 5 – 7 (neutral after coating) |
| Touch dry | 10 – 30 minutes |
| Hard dry |
- M.S. Pipes, M.S. Sheets, M.S. Wires M.S. Plates
- Ropes, rods, grills, rolling shutters
- Castings and railings
- Machineries, automobiles
- Railway coaches & wagons, boats, ships
- Bolts, screws, nuts and shafts
- Eliminates sand blasting, acid pickling, washing, flame cleaning, wire brushing, phosphating and oiling
- Penetrates deep and converts all rusted layers into bluish black protective coating
- Saves the cost of red oxide priming
- Paintables
- Best before 6 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
Single coat only.
250 sq.ft / litre / coat.
- Clean the surface thoroughly free from oil, grease and loose rust
- Shake the Metal Pro solution well before use and transfer it to a plastic container
- Apply a single coat by brush or spray or immersion
- Allow the surface to dry for one day for complete rust conversion
- After a day, coat with desired paint
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use. Cured material can be removed mechanically.