M-Sand Boozter is a chloride-free, synthetic polymer-based cement enhancer which allows replacing river sand with M-Sand completely for plastering, concrete and brick works.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Dark brown |
| Specific gravity @27°C | 1.25 ± 0.05 |
| Non-volatile content | 35 ± 3 % |
| pH | 10 ± 3 |
- Cement brick works, cement plaster and cement concrete
- Ready mix concrete, concrete piles, and precast concrete
- Dams,bridges, tunnels, fly-overs, canals and seashore projects
- Foundations, floor slaps, walls, columns, beams, ceilings, balconies, etc
- All slender components with heavy reinforcement
- Effectively helps replace river sand
- While plastering, smooth and ease of application by locking the pores
- Increases in compressive strength and plasticity
- Development of early strength, workability, slump retention and setting time
- Reduction of cement content, cracks, creeps and shrinkage
- Reduction of cost and time of construction and amount of labour required
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
- Development of early strength, workability, slump retention and setting time
- Reduction of cost and time for construction and the amount of labour required
200 ml / 50 kg of cement.
- Cement, sand and other aggregates are mixed with 90-95% of required water for 2-3 minutes
- The recommended quantityof M-Sand Boozter is measured and added to the balance 5-10% of water and added to wet concrete
- This mixture is mixed thoroughly for further 2-3 minutes to get a homogenous mix
- Do not add M-Sand Boozter directly to dry mix
- Maintain water-cement ratio as low as possible
- Do not increase the dosage of M-Sand Boozter beyond the recommended level
- Over dosage may lead to delay in setting time
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Dark brown |
| Specific gravity @27°C | 1.25 ± 0.05 |
| Non-volatile content | 35 ± 3 % |
| pH | 10 ± 3 |
- Cement brick works, cement plaster and cement concrete
- Ready mix concrete, concrete piles, and precast concrete
- Dams,bridges, tunnels, fly-overs, canals and seashore projects
- Foundations, floor slaps, walls, columns, beams, ceilings, balconies, etc
- All slender components with heavy reinforcement
- Effectively helps replace river sand
- While plastering, smooth and ease of application by locking the pores
- Increases in compressive strength and plasticity
- Development of early strength, workability, slump retention and setting time
- Reduction of cement content, cracks, creeps and shrinkage
- Reduction of cost and time of construction and amount of labour required
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
- Development of early strength, workability, slump retention and setting time
- Reduction of cost and time for construction and the amount of labour required
200 ml / 50 kg of cement.
- Cement, sand and other aggregates are mixed with 90-95% of required water for 2-3 minutes
- The recommended quantityof M-Sand Boozter is measured and added to the balance 5-10% of water and added to wet concrete
- This mixture is mixed thoroughly for further 2-3 minutes to get a homogenous mix
- Do not add M-Sand Boozter directly to dry mix
- Maintain water-cement ratio as low as possible
- Do not increase the dosage of M-Sand Boozter beyond the recommended level
- Over dosage may lead to delay in setting time
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children