Flow Faast is a chloride-free super plasticiser which allows mixing water to be reduced considerably and enhances the concrete strength significantly, particularly at early stages.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Wine red/dark brown |
| Specific gravity @27°C | 1.05 – 1.15 |
| Non-volatile content | 15 ± 3 % |
| pH | 9 - 3 |
| Water Reduction | Max 20% |
- Ready mix concrete, concrete piles and precast concrete
- Dams,bridges, tunnels, fly-overs, canals and seashore projects
- Foundations, floor slaps, walls, columns, beams, ceilings, balconies, etc
- All slender components with heavy reinforcement
- Increases in compressive strength and plasticity
- Reduces water to cement ratio by about 20% and significantly reduces water permeability
- Development of early strength, workability, slump retention and setting time
- Reduction of cement content, cracks, creeps and shrinkage
- Reduction of cost and time of construction and amount of labour required
- Provides faster mould release and increases bonding to reinforcement steels
- Improves flow up to 120 mm slump test.
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
100 – 200 ml / 50 kg of cement.
- Cement, sand and other aggregates are mixed with 90-95% of required water for 2-3 minutes
- The recommended quantity of Flow Faast is measured and added to the balance 5-10% of water and added to wet concrete
- This mixture is mixed thoroughly for further 2-3 minutes to get a homogenous mix.
- Do not add Flow Faast directly to dry mix
- Maintain water-cement ratio as low as possible
- Do not increase the dosage of Flow Faast beyond the recommended level
- Over dosage may lead to delay in setting time
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Wine red/dark brown |
| Specific gravity @27°C | 1.05 – 1.15 |
| Non-volatile content | 15 ± 3 % |
| pH | 9 - 3 |
| Water Reduction | Max 20% |
- Ready mix concrete, concrete piles and precast concrete
- Dams,bridges, tunnels, fly-overs, canals and seashore projects
- Foundations, floor slaps, walls, columns, beams, ceilings, balconies, etc
- All slender components with heavy reinforcement
- Increases in compressive strength and plasticity
- Reduces water to cement ratio by about 20% and significantly reduces water permeability
- Development of early strength, workability, slump retention and setting time
- Reduction of cement content, cracks, creeps and shrinkage
- Reduction of cost and time of construction and amount of labour required
- Provides faster mould release and increases bonding to reinforcement steels
- Improves flow up to 120 mm slump test.
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
100 – 200 ml / 50 kg of cement.
- Cement, sand and other aggregates are mixed with 90-95% of required water for 2-3 minutes
- The recommended quantity of Flow Faast is measured and added to the balance 5-10% of water and added to wet concrete
- This mixture is mixed thoroughly for further 2-3 minutes to get a homogenous mix.
- Do not add Flow Faast directly to dry mix
- Maintain water-cement ratio as low as possible
- Do not increase the dosage of Flow Faast beyond the recommended level
- Over dosage may lead to delay in setting time
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children