• Cracks in concrete, plasterboards, brickworks
• Expansion joints in precast concrete boards
• Joints in block-work, brickwork and timber/steel joints
• Sealing window and door frames
• Sealing between light partition walls
• Sealing around ceramic tiles

• Excellent sealing and adhesion properties
• Over paintable
• Outstanding flexibility
• Waterproofing
• Paste form, no sagging and easy to apply
• Excellent resistance to UV and atmospheric conditions

• Best before 6 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
• Protect from direct sunlight

Minimum joint width = 1 mm
Maximum joint width = 5 mm

6 – 7 running meter/kg (for 3 mm width and 5mm depth).

• Before starting the applications, ensure all surfaces are clean, dry and free from dust and grease
• Remove all loose materials from the surface with air blower or brush
• Fine hair cracks should be widened with V groove up to 1 mm minimum and then filled
• Vijay Crack-X should be applied on plaster surface only not on POP and putty surfaces (remove all POP and Putty around the area)
• For porous surfaces, apply primer coat prepared with Vijay Crack-X paste and water in 1:1 proportion over the crack & fill Vijay Crack-X paste when the surface is tacky and not completely dried
• Fill & press paste tightly into the crack with a spatula or putty knife and level with surface without any formation of cavities or bubbles
• Allow it set for 24-hrs prior to another coat or other applications
• For best results allow Vijay Crack-X to cure for 7 days

• Don’t use underwater
• Don’t use to seal submerged joints
• Don’t apply on damp substrates
• Do not use in external applications where rain is imminent within 4 hours
• Allow to dry for 24-hours
• For application below 10°C, drying time will be delayed
• Container should be closed tight after application

• Use rubber hand gloves & safety goggles
• In case of contact with skin, wash with plenty of water
• Keep out of reach of children