Corrosolve is a corrosion inhibiting admixture for steel reinforced concrete.
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Amber colour |
| Specific gravity @27°C | 1.10 - 1.20 |
| Non-volatile content | 20 - 30% |
| pH | 7 - 8 |
- Conventional steel reinforced concrete
- Parking garage decks, bridge decks and marine structures
- Penetrates concrete and protects the rebars from corrosion
- Provides effective protection against corrosion by chlorides in concrete
- Enhancing the life and strength of reinforced concrete
- Environment friendly
- Easy to use, neutral set liquid admixture
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
100 ml Corrosolve for 1 bag (50 kg) cement.
- Dry mix the sand, aggregates and cement as per the mix design in a concrete mixer for 2 minutes
- Then add 75% of required water and mix for 2-3 minutes
- In the remaining portion of the required water add Corrosolve. Then add this to concrete mixer and mix for another 2-3 minutes for a homogenous mix
- Flow Faast and Water Seal can be added to the mixture
- Cure as per the normal procedure
- Do not add Corrosolve directly to dry cement or aggregate mix
- Do not increase the dosage of Corrosolve than the recommended level
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Clean all tools and application equipments with water immediately after use
- Cured material can be removed mechanically
| Properties | Specifications |
|---|---|
| Appearance | Free flowing liquid |
| Colour | Amber colour |
| Specific gravity @27°C | 1.10 - 1.20 |
| Non-volatile content | 20 - 30% |
| pH | 7 - 8 |
- Conventional steel reinforced concrete
- Parking garage decks, bridge decks and marine structures
- Penetrates concrete and protects the rebars from corrosion
- Provides effective protection against corrosion by chlorides in concrete
- Enhancing the life and strength of reinforced concrete
- Environment friendly
- Easy to use, neutral set liquid admixture
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
100 ml Corrosolve for 1 bag (50 kg) cement.
- Dry mix the sand, aggregates and cement as per the mix design in a concrete mixer for 2 minutes
- Then add 75% of required water and mix for 2-3 minutes
- In the remaining portion of the required water add Corrosolve. Then add this to concrete mixer and mix for another 2-3 minutes for a homogenous mix
- Flow Faast and Water Seal can be added to the mixture
- Cure as per the normal procedure
- Do not add Corrosolve directly to dry cement or aggregate mix
- Do not increase the dosage of Corrosolve than the recommended level
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
- Clean all tools and application equipments with water immediately after use
- Cured material can be removed mechanically