Termite-X is a concentrate of anti-termitic solution for old & new buildings, wood products.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | Alkaline |
| Specific gravity @27°C | 1.60 – 1.80 |
| Solids | 3 - 5% |
- Old and new buildings
- Wooden articles
- Environment friendly
- Cost-effective
- Does not stain on wooden articles
- Total protection against termite attack
- No side effects
Dilute 1000 ml of Termite-X concentrate with 50 litres of water and use it as Termite-X service solution.
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
For new buildings:
Termite-X service solution to be sprayed or poured as follows
- Foundation pits – 5 litres for 10 sq. ft
- Both sides of foundation walls – 5 litres for 10 ft. long
- Earth filling – 5 litres for 10 sq. ft
For old buildings:
In the junction of floor and walls where termite infestation is found, holes to a depth of 6 inches with an inter-hole distance of one feet may be made and flooded / poured with adequate Termite-X service solution.
For door frames and similar places:
Spraying / sprinkling of Termite-X service solution is recommended. In all cases, to obtain 100% efficiency of Termite-X, the infected area must be cleaned.
Protection of Wooden Articles:
1000 ml of Termite-X to be dissolved in 10 litres of turpentine oil or kerosene and applied over raw wooden articles.
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use.
| Properties | Specifications |
|---|---|
| Type | Solvent based |
| Colour | Alkaline |
| Specific gravity @27°C | 1.60 – 1.80 |
| Solids | 3 - 5% |
- Old and new buildings
- Wooden articles
- Environment friendly
- Cost-effective
- Does not stain on wooden articles
- Total protection against termite attack
- No side effects
Dilute 1000 ml of Termite-X concentrate with 50 litres of water and use it as Termite-X service solution.
- Best before 12 months in an unopened, undamaged, originally sealed packing and if stored in dry conditions
- Protect from direct sunlight
For new buildings:
Termite-X service solution to be sprayed or poured as follows
- Foundation pits – 5 litres for 10 sq. ft
- Both sides of foundation walls – 5 litres for 10 ft. long
- Earth filling – 5 litres for 10 sq. ft
For old buildings:
In the junction of floor and walls where termite infestation is found, holes to a depth of 6 inches with an inter-hole distance of one feet may be made and flooded / poured with adequate Termite-X service solution.
For door frames and similar places:
Spraying / sprinkling of Termite-X service solution is recommended. In all cases, to obtain 100% efficiency of Termite-X, the infected area must be cleaned.
Protection of Wooden Articles:
1000 ml of Termite-X to be dissolved in 10 litres of turpentine oil or kerosene and applied over raw wooden articles.
- Use rubber hand gloves & safety goggles
- In case of contact with skin, wash with plenty of water
- Keep out of reach of children
Clean all tools and application equipments with proper thinner or kerosene immediately after use.